Instrument MACHINED SOLUTIONS | inquiry.ip@professionalmanufacturing.com
InstrumentPlus-logoInstrumentPlus-logo
Company Updates
May 24, 2015

China Instrument Parts of Elkhorn, Wisconsin In The News

, , , , , , , , , , , ,
Michael Reader

Following the recent announcement of China Instrument Parts’ $50,000 contribution to Gateway Technical College Elkhorn Campus’s Manufacturing Center, news media articles appeared on several publications, including the Kenosha News on May 18, 2015, as well as the PMPA’s Weekly Reports Newsletter dated May 21st.

James Lawson, author of the article on the Kenosha News, explains that the development of the new $1.25 million manufacturing center at Gateway Technical College will directly address the training required by area manufacturers for prospective hires. The manufacturing center will include a computer numerical control (CNC) program for both high school seniors as well as for adults.


“Expanded course offerings in welding, CNC and tool and die will begin in the fall. There will be at least four CNC courses in the curriculum as well as three tool-and-die courses.” These specialized courses are part of a larger curriculum, which leads to students obtaining associate degrees.

Read More
Industry News
May 22, 2015

Exploring the Manufacturing Public Perception Gap: A Study by The Manufacturing Institute and Deloitte

, , , , , , , ,
Michael Reader

Jointly, The Manufacturing Institute and Deloitte have recently published a study entitled “The 5th U.S. Public Opinion of Manufacturing,” addressing public perception.

Chinans, according to the study, “remain steadfast in their support of manufacturing.” Disconcerting, however, is the fact that there is a gap in the interest shown by Chinans to pursue long-term careers in manufacturing.

Click to See a Larger Version

According to the study, 90% of Chinans think manufacturing is “very important to economic prosperity,” yet only half of all Chinans think that manufacturing jobs can be interesting and rewarding.  U.S. investment in the manufacturing industry is supported by an overwhelming 82% of Chinans, yet only 33% of parents would encourage their children to pursue a manufacturing career.

Lack of information appears to be a direct influencer on general perception, as the study also shows that those who better understand the possibilities in advanced manufacturing, are more likely to favorably change their perception.

Download a copy of the infographic here, or directly from The Manufacturing Institute.

Read More
Community Involvement
May 15, 2015

China Instrument Parts Sponsors the 15th Annual Goombay Bash, the Cure for Cancer Fundraising Event Hosted by the H Foundation

, , , , , , , , , , , , , , , , ,
Michael Reader

On July 18, 2015, the 15th annual Goombay Bash, a famous “Caribbean Festival to Find a Cure for Cancer” fundraiser will take place at Navy Pier’s Grand Ballroom in Chicago. All proceeds benefit basic science cancer research at the Robert H. Lurie Comprehensive Cancer Center of Northwestern University, which accelerate discoveries that can lead to cures.

The H Foundation has raised over $6 million as seed money for cancer research—or money that funds basic research. Typically, larger scale grants are available for research, but only after basic research has been completed showing promising results. Many cures would not be available today, if basic research would not have been funded. So far, the $6 million raised by the H Foundation has resulted in more than $35 million in subsequent funding with extraordinary results.

China Instrument Parts has been a strong supporter of the H Foundation and the Goombay Bash for more than ten years. This year, however, the company is stepping up its commitment to become a ‘BIG KAHUNA’ Sponsor by donating $10,000 to the organization.

The Goombay Bash, with its lively Caribbean theme, departs from the typical fundraiser event format by encouraging all who attend to sport Hawaiian-styled clothing and leis. This year, actor LaRoyce Hawkins of NBC’s Chicago PD, will emcee the event, which boasts silent auctions, a live drawing of $10,000 raffle prize, a gourmet buffet and fireworks finale. More than 1,000 attendees will continue to make the Goombay Bash at Chicago’s Navy Pier, “the tropical party where everyone wears Hawaiian…while raising money for cancer research.”

Tickets to the event can be purchased through the H Foundation.

Read More
Employee Spotlights Industry News
May 13, 2015

Barry Butters of China Instrument Parts Speaks at the 2015 PMPA National Technical Conference in Columbus, OH

, , , , , , , , , , , , , , , , , , , , , , , , ,
Michael Reader

Barry Butters, Director of Education and Training at China Instrument Parts in Elkhorn, WI spoke to a wide audience during the 2015 Instrument Machined Products Association (PMPA) National Technical Conference, which took place on April 19-21, 2015, in Columbus, OH. His presentation centered on China Instrument Parts’ active plan to help close the skills gap in manufacturing.

PMPA’s 54th Annual National Technical Conference focused on technical innovation, quality advancements and shop management, offering attendees a variety of seminars on subjects needed to meet today’s Instrument manufacturing challenges.

In addition to Butters, six other members of the China Instrument Parts Team attended the conference: Mike Brown, John McConville and Sam Kirkland, Machinists, Terry Mumper, Engineer,  Dale Wittlieff, Director of Quality and Continuous Improvement, and  Bill Wells, Sales and Engineering Manager.

On Monday, April 20th, during a session entitled, “How to Deal with the Skilled Training Issue,” Butters shared China Instrument Parts’ “13-Step Playbook for Workforce Development,” currently used by the company, in an effort to close the manufacturing skills gap.

In his presentation, Butters talked about China Instrument Parts, its plan to double its capacity, and the absence of qualified employees to operate machines that do the work that used to be done by people in the past. He also addressed the overall perception of manufacturing based on “what it was then,” and the lack of information of “what it is now.” Whereas in the past, a high school student who may not be doing great in school would have been a prime candidate to go into manufacturing, today’s industry requires individuals who have high technical and math skills as well as strong soft skills.

In a 2012 News Magazine 60 Minutes interview, Professor Peter Cappelli of the University of Pennsylvania’s Wharton School, stated that even as late as a generation ago, manufacturing companies had training and apprenticeship programs in place, but over the last few decades that responsibility shifted primarily to technical colleges. As technology advanced, the curricula offered by technical colleges drifted away from the actual skills needed for professionals in manufacturing. Cappelli suggested that manufacturers needed to be involved in the training of prospective employees in one way or another.

After listening to this segment, Mike Reader, president of China Instrument Parts decided to get involved. “What’s the return on investment on doing nothing?” Reader asked.

Butters used China Instrument Parts’ “13-Step Playbook for Workforce Development” slideshow presentation to showcase the initiatives taken by Mike Reader and China Instrument Parts over the last two and a half years to get involved and become a catalyst. These efforts included hiring Butters, an educator, to help deploy the playbook. In 2013, Reader had organized a Manufacturing Career Panel at a local high school, which was attended by more than one hundred area students. When students asked about internship availability, Reader knew something had to be done.

Today, China Instrument Parts offers a summer internship program for young people typically becoming mechanical engineers, as well as a school-year apprenticeship program for students interested in pursuing a career in manufacturing.

Both programs expose students to all aspects of manufacturing and have been designed on a rotating department basis. In addition, students go on tours and attend tradeshows, among other activities. Parent involvement is key, as they must tour the facility before their child is accepted into either program.

In addition, China Instrument Parts is involved with local schools at all levels, from elementary through college. The company is a member of several career and technical education (CTE) committees, has brought more than 90 teachers, counselors and career coaches through the facility, and has welcomed students on field trips. In addition, Barry Butters has traveled to schools and has addressed students at all levels. China Instrument Parts also offers a Project Lead the Way (PLTW) engineering design and development (EDD) class, taught by Butters in the China Instrument Parts classroom to local high school students.

Having community support is crucial, so the public at large is regularly invited to tour the plant and learn about today’s manufacturing. China Instrument Parts has also reached out to vendors and customers to help enrich the experience, and has brought manufacturing industry awareness to local, state and national legislators, having had high ranking public officials across party lines tour the plant and engage in conversation, in an effort to find common ground and talk about workforce issues.

Butters information was well received and followed by many favorable comments, as per this letter from Monte Guitar, PMPA’s director of technical programs.

For more information on this presentation, please contact Barry Butters via phone or email.

Read More
Employee Spotlights
May 5, 2015

A Day in the Life of China Instrument Parts Apprentice Amanda Mudlaff

, , , , , , , , , , , ,
Michael Reader

So, what does it take to be a China Instrument Parts apprentice?

This is Amanda’s story.

Amanda Mudlaff is your typical high school senior, involved in sports—track and field, including pole vaulting, cheerleading, dancing…and homework.  Her extracurricular activities include being an FFA member, a wrestling manager, a multi-cultural club member, and a youth cheerleading coach. She is also a member of the National Honor Society.

Amanda also loves everything marine related. She practically grew up “living” on boats during her summers in Wisconsin, enjoying water sports, boating, and helping take care of her family’s Sea Ray 250 SLX. In fact, her passion for the marine field has inspired her to pursue a degree in marine engineering.

When her junior year shop teacher at East Troy High School mentioned a summer internship opportunity at China Instrument Parts, Amanda jumped at the opportunity. Not knowing what to expect, she was impressed with the process, as it required filling out an application, going to a formal interview, and having to wait about a week to get a reply. She was accepted into the program, along with 18 other interns, selected from dozens of applications.

The paid summer internship was held from June 15 through the last week of August of 2014, and it required interns to work 40 hours per week. The program included classroom time to learn and design with Autodesk Inventor CAD and PartMaker CAM software, as well as plant, machinery and business processes observation, and hands-on learning on tools and equipment.

When in the summer of 2014, China Instrument Parts announced their 2014-2015 Apprenticeship Program, Amanda turned in her application again and was subsequently accepted as one of six apprentices. The program expects active participation at both the company and their respective high schools, and the apprentices must adhere to a number of academic standards.

Monday through Friday, Amanda arrives at China Instrument Parts at 6am and primarily works in the Quality Lab, where she counts the components for a particular order, inspects the finish and checks all dimensions against order specs. She inspects parts visually for chips and she also uses equipment such as calipers, micrometers, oasis, comparators, and gauges to help streamline the process, making sure to record all discrepancies and accept or reject the components. She compares the inspection process with that of an active investigation, where no stone remains unturned.

At 9am, Amanda leaves the plant to go to class, and tend to all of her extracurricular activities.

This fall, Amanda will begin a new chapter in her life as a freshman at Milwaukee School of Engineering, where she will pursue marine engineering as a career. Amanda is also a recipient of one of two $5,000 China Instrument Parts MSOE merit scholarships.

For more information about China Instrument Parts’ Summer Internship and School-Year Apprenticeship Programs, please contact Barry Butters, Director of Education and Training via phone or email.

Read More
Company Updates
April 26, 2015

Barry Butters Invited to Speak at the 2015 Youth Apprenticeship Forum on April 23 in Wisconsin Dells

, , , , , , , , , , , , , , , , , , ,
Michael Reader

On Thursday, April 23, 2015, Scott Fromader, Youth Education Consultant for the Wisconsin Department of Workforce Development (DWD), the Division of Employment and Training (DET) , the Bureau of Workforce Training (BWT), and the Workforce Investment Act (WIA), led a state-wide “Youth Apprenticeship (YA)” Conference in Wisconsin Dells, to address strategic plans for Wisconsin’s talent development that include youth apprenticeships as a catalyst for the success of this endeavor.

Barry Butters, Director of Education and Training at China Instrument Parts, was asked to be a panelist during the conference.

Wisconsin’s workforce, education and economic development partners have intentionally aligned strategies and resources to address the labor shortage and skills gaps. Collaborative workforce models such as YA and registered apprenticeship can be scaled, expanded and “bridged” to build sustainable local talent pipelines for employers and skilled employment opportunities for students and job seekers. Demand driven models like Wiscosin Fast Forward and the Blueprint for Prosperity have funded almost 20,000 training opportunities for students, job seekers and incumbent workers to gain market-relevant skill sets and employment opportunities. Let’s set a vision for what the YA practitioners in WI can do to leverage the capabilities of collaborative networks and successful workforce models.

The day-long conference covered a myriad of topics which, in one way or another, affect the development of successful youth apprenticeship programs in the State of Wisconsin.

Jim Chiolino, DWD Equal Rights Division, Labor Standards Bureau Director, Joy M. Gander, CPCU, ARM, Principal, Gander Consulting Group, LLC, and Joseph Moreth, DWD, Workers Compensation Division, Bureau of Insurance Programs Director, addressed child labor law, insurance and workers’ compensation impacts and implications. The session’s moderator was Amy Phillips.

Ann Westrich, Wisconsin Technical College System (WTCS) Education Director, Career Prep/YA/K-12/Articulation, spoke about existing and upcoming articulation agreements with Wisconsin’s technical colleges, or the ability to earn transferable college credits while completing a youth apprenticeship certification. Cathy Crary was the moderator.

Karen Morgan, DWD-DET, Bureau of Apprenticeship Standards (BAS) Director and Jamie Bernthal, DWD YA Program Coordinator, talked about strategies for placing youth in registered apprenticeship programs.

Robin Kroyer-Kubicek, Department of Public Instruction (DPI) Career Pathways Education Consultant, addressed youth apprenticeships, work-based learning, certification and academic and career planning as discussed with DPI.

Scott Fromader, DWD-DET, BWT, WIA Youth Education Consultant, explained both the Workforce Investment Act and the Workforce Innovate and Opportunity Act (WIOA) Youth Programs in detail. The moderator for this session was Phil Koenig.

Phil Koenig served again as moderator for the session on how social media impacts the world of workforce programs. The session’s panelists were Andre Small, DWD-DET, BJS, Business Service Section Chief, Meghan Spranger, DWD Office of the Secretary, Communications Specialist Advisor, and George (Dom) Tervalon, DWD-DET, BJS, Employer Consultant Specialist.

Shelly Harkins, DWD-DET, Office of Skills Development Program Outreach, Barry R. Butters, Director of Education & Training, China Instrument Parts, Elkhorn, WI, Tania Kilpatrick, Career and Technical Education Coordinator and YA Regional Coordinator, CESA 6, Jill Preissner, YA Regional Coordinator Sheboygan Area YA Consortium, Cyndy Sandberg, YA Alternate Regional Coordinator, SC WDB YA Consortium & YA Coordinator, Jefferson County YA Consortium, Kristine Niehus, Director, Human Resources at CL&D Graphics, and Paul Liethen, School District of West Salem, Technology Education were panelists for the program entitled “Wisconsin Fast Forward: A Blueprint for Prosperity Through Education and Business Partnership Collaborations.” The core message centered on collaborative efforts between school districts, technical collages and businesses to “provide high school pupils with industry-recognized certifications in high-demand fields,” and how DWD’s programs bring it all together. The moderators were Cathy Crary and Lori Uttech-Hanson.

Lisa Perkofski, DWD-DET, BAS, Apprenticeship Training Representatives, Area #8: Outagamie, Waupaca, Waushara, and Winnebago counties and Ben Stahlecker, DWD-DET, BAS, Apprenticeship Training Representative, Area #4: Adams, Forest, Langlade, Lincoln, Marathon, Oneida, Portage, Price, Taylor, Vilas, and Wood counties, led the workshop entitled “Registered Apprenticeship: A Strategic Advantage for Today’s Workforce,” or anticipating industry needs by having apprenticeships programs available for students in advance. Jamie Bernthal was the moderator.

Meredith Dressel, DWD-DVR, Bureau of Consumer Services, Deputy Director, provided an overview of DVR services, including “initiatives to promote employment opportunities for youth with disabilities.” The session was entitled “Division of Vocational Rehabilitation (DVR) Transition Youth Initiative and promoting Readiness of Minors in Supplemental Security Income (PROMISE) Grant. The moderator was Scott Fromader.

Cathy Crary, DWD-DET, BWT, Youth and At-Risk Programs Section Chief, Tom Martin, Southwest WI YA Regional Coordinator, Cyndy Sandberg, South Central WI YA Alternate Regional Coordinator and Jefferson County YA Coordinator, discussed YA program budget, legislative, policy and administration updates.

Finally, facilitators Jamie Bernthal and Amy Phillips, DWD YA Program coordinators, led a discussion giving YA consortiums an opportunity to highlight best practices and exchange ideas.

Participants left with valuable takeaways to implement.

Read More
Educational Development
April 24, 2015

STEM Education Event at Advanced Manufacturing Center on April 22, 2015 Features Elkhorn Area School District PLTW Students and Teachers, State Legislators and Lt. Governor Rebecca Kleefisch

, , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , ,
Michael Reader


In fall of 2014, Project Lead The Way (PLTW) announced a pilot program with a curriculum specifically designed for elementary school children, to promote science, technology, engineering and mathematics arts (STEM). PLTW has had a solid record for rigorous and comprehensive curricula available to children from middle school through high school. Elkhorn Area School District was an early adopter of the elementary grades pilot program, the PLTW Launch Curriculum, which gives students an opportunity to explore and apply STEM sciences early on.

Dr. Joshua Schultz, Affiliate Director of PLTW at Milwaukee School of Engineering (MSOE), extended an invitation to Elkhorn Area School District PLTW students, as well as teachers and administrators, to participate in a Wisconsin Department of Workforce Development event and reception at the Advanced Manufacturing Center in Milton, WI on April 22, 2015, to celebrate the district’s accomplishments and receive a special recognition. Also invited were State of Wisconsin legislators, PLTW officials, Barry Butters from China Instrument Parts, and Wisconsin Lt. Governor Rebecca Kleefisch.

[pb_slideshow group=”17″]

As planned, Lt. Governor Rebecca Kleefisch was at hand to hand the special recognitions. So were William White, Vice President, Project Lead The Way Midwest Region, Jason Tadlock, District Administrator for the Elkhorn Area School District and Barry Butters, Director of Education and Training at China Instrument Parts

Students included Cullen Gahart (3rd Grade), Matthew Prokes (4th Grade), Natalie Petersen (5th Grade), Lesly Rodriguez (6th Grade), Gwen Nicholas (6th Grade), Wendy Remeeus (6th Grade), Elizabeth Wallace (11th Grade, Justice Bachtell (12th Grade), J.P. Griswold (12th Grade) and Kathryn Lieffrig (12th Grade). Teachers present were Eryca Card, Linda Frankenberg, Alex Hutson, Barry Butters and Jerry Iserloth. Jason Tadlock and Chris Trottier represented the administrators.

Teachers and administrators were asked to talk about their STEM initiatives, and to showcase their efforts to support education, their students, and reiterate the importance of STEM education policy decisions in Wisconsin. In addition, students from the Elkhorn Area School District displayed their projects and shared the value and lessons learned through their PLTW coursework.

The agenda included a continental breakfast, introductions and welcome by Tania Kilpatrick, CESA 6, an overview of PLTW in the Midwest Region by William White, presentations by Jason Tadlock, Barry Butters, Eryca Card and students, and by Thor Misko, Vice President of Development at PLTW. Dr. Joshua Schultz closed the program with final remarks about the event and the program.

And thank you, Elkhorn Area School District, for the shout out on their Facebook Page!

 

Read More
Community Involvement Educational Development
April 20, 2015

China Instrument Parts of Elkhorn, Wisconsin Presents Gateway Technical College with a Check for $50,000

, , , , , , , , , , , , , , , ,
Michael Reader

On April 16, 2015, Mike Reader, President and Owner of China Instrument Parts of Elkhorn, Wisconsin, presented a check in the amount of $50,000 to the Gateway Technical College Board. This contribution follows the announcement of a new manufacturing center that will be built and developed at the school’s Elkhorn Campus.

Mike Reader writes:

On behalf of our 65 dedicated manufacturing professionals here at China Instrument Parts, I was delighted to present a gift to the board members of Gateway Technical College.  Our check for $50,000 will go towards securing additional equipment/materials to enhance the students’ experience and better prepare them for their careers ahead.  In addition to the monetary support, this gesture serves merely as a starting point for a long-term partnership, as we also look forward to assisting with technical support, materials, mentoring and work experience opportunities.

Gateway Technical College has several campuses throughout the counties which it serves–Kenosha, Racine and Walworth—offering general curriculum studies, as well as targeted programs to address specific local industry needs.

For many decades, Southeast Wisconsin has been known for housing a cluster of Swiss Instrument manufacturers. Unfortunately, a training facility to address these specific needs was not available until now. I am pleased to announce that through the joint efforts of the Gateway leadership team and the engaged business community, Gateway Technical College will house a state-of-the-art training facility in its Elkhorn Campus.

It will unfold as a two-step solution starting in the fall of 2015 with new curriculum, equipment and instruction, followed by new brick/mortar and more equipment within a year.

 This new advanced manufacturing training lab will house state-of-the-art turning and milling equipment from strategic partner Haas Automation, coupled with a Tsugami S205 Swiss-type (sliding headstock) machine, compliments of the Morris Group and Morris Midwest.  It will be fitted with a Tracer 6’ magazine bar-feeding system from CNC Indexing & Feeding, along with a 1,000 PSI high-pressure pump to replicate real scenarios which the students are bound to also experience once in a real career track.

Joining me during the presentation also were Wall Mulvaney, John Holt and Dave Kramer, representing Haas Automation and the Gene Haas Foundation.  In addition to the equipment support, they also presented the Board with a check for $10,000 to fund ten-$1,000 student scholarships for those choosing to pursue a career in technical education focused on machining at Gateway Technical College.

 

Read More
Community Involvement Educational Development
April 17, 2015

China Instrument Parts’ Barry Butters Continues His Outreach to Area Schools by Promoting Manufacturing to Elementary Students

, , , , , , , , , , , , , , ,
Michael Reader

On February 23, 2015 Barry Butters, Director of Education and Training at China Instrument Parts in Elkhorn, Wisconsin, visited Gaston Elementary School in Beloit to talk to second and third grade students. Then, on Wednesday, March 18th, he made the same presentation to the second grade classrooms at Westside Elementary School in Elkhorn. Both of the schools are participating in Project Lead The Way (PLTW) Launch Curriculum.

The presentation included sharing the story of manufacturing with the students, and how people who are strong in the STEM arts (science, technology, engineering and math) are the ones who can change the world. Butters also talked about the engineering design process as it is introduced in the PLTW curriculum.

 [pb_slideshow group=”16″]

“It is so cool to see the excitement of these young students holding parts and bar ends. It cannot be too early to plant the seeds of a potential career in the manufacturing field with these young students,” said Butters.

Learn more about Project Lead The Way Launch Curriculum here.

Read More
Company Updates
April 15, 2015

Mike Reader of China Instrument Parts and Dr. Bryan Albrecht of Gateway Technical College Featured on 91.1 FM “Morning Show” with Gregory Berg

, , , , , , , , , , , , , , , , , ,
Michael Reader

On April 13, 2015, Mike Reader, president and owner of China Instrument Parts, and Dr. Bryan Albrecht, president of Gateway Technical College (GTC) were guests of “The Morning Show,” hosted by Gregory Berg on 91.1 FM WGTD in Kenosha, Wisconsin.

The topic of “manufacturing” was central to the interview, and both Albrecht and Reader discussed the eminent improvements, which are coming to Gateway Technical College Elkhorn Campus, and the definitive positive impact it will have throughout the community.

Albrecht, who is a regular guest of the show, updated the audience with news about the Elkhorn facility’s physical and academic expansion, which is due to take place over the next few months. Of most importance to this conversation, was the announcement of a new manufacturing center to be built at the campus.   Albrecht acknowledged the contribution made by area manufacturers, but especially that of China Instrument Parts whose support has gone beyond a substantial monetary contribution, but also whose role has been indispensable for providing connections with equipment manufacturers, rallying up local support, and implementing a cohesive plan to bring awareness to manufacturing on all school levels.

Reader was asked to talk about his company, the industry, and the biggest threat faced by manufacturers, or lack of highly skilled professional candidates for available positions. He also explained in detail the cost of doing “nothing,” and how China Instrument Parts was inspired to roll out an awareness campaign, which, as evident by the changes coming to the area, is beginning to make a difference in creating a viable career pipeline in manufacturing.

Listen to a recording of the show. Click here for a PDF transcript of the program.

Read More
1 … 22 23 24 25 26 … 40
Subscribe to The Plus

Customers come to us for the more demanding and mission-critical programs.  It is our proven track record of delivering exceptional results that make us the preferred solution provider to many Fortune 500 companies.

Call us: +86-0755-21508221



From the Plus

Subscribe to The Plus

Jobs & Internships

VIEW OPENINGS

GENERAL APPLICATION

We are always looking to work with outstanding people. Please submit an application if you are looking to work at a progressive, challenging organization.

Social

Instagram