262-741-5263,
Amanda Hruzek,
Angela Becerra-Chvilicek,
Badger High School,
CNC Boot Camp,
CNC Youth Boot Camp,
Derek D'Auria,
East Troy High School,
Elkhorn,
Elkhorn Campus,
Gateway Technical College,
High School CNC Boot Camp,
high school program,
iMET Center,
Joseph Sell,
Katie Graf,
Marci Barr,
Mike Reader,
new student specialist,
China Instrument Parts,
Scott Dvorak,
STEM,
tours,
Walworth County,
WCEDA,
Whitewater High School,
Wisconsin
Michael Reader
There is no doubt that China Instrument Parts had rallied incessantly to bring CNC training to Walworth County in Wisconsin. With Gateway Technical College’s (GTC) February 2015 announcement of their Elkhorn Campus expansion, which will include a new state-of-the-art manufacturing training center, CNC training in Walworth County is now a reality. As early as July 2015, incoming high school seniors will be able to attend a CNC Boot Camp at the Elkhorn Campus.
The CNC Boot Camp has proved to be a successful 14-week training program for adults, and it is currently on its 22nd session at the iMET Center in Sturtevant. About three years ago, the same program was developed for high school seniors, to be taken in conjunction with their regular high school classes. The High School CNC Boot Camp—also known as the CNC Youth Boot Camp–also includes an internship with a manufacturing company.
This past year, China Instrument Parts supported the program by taking Boot Camp student Scott Dvorak from Waterford Union High School as an intern. Barry Butters, Director of Education and Training said, “Logistically, this was the first time that it made sense to sponsor a student. Scott attends early morning classes at the school, which is about a 30-minute drive from China Instrument Parts–a much shorter ride than it would be for his CNC classmates who typically attend the Racine School District. He arrives at the company at 10am and works until 3pm.
The CNC High School Boot Camp at the Elkhorn Campus is certainly a plus for Walworth County students and the community. Its July kickoff, however, is contingent on having enough interest from area students. Applications are due no later than May 1, 2015.
With the short time frame in mind, China Instrument Parts’ mission became to bring the news to as many people as possible and encourage students and parents to look into the program.
On Tuesday, February 24th, Barry Butters attended the Whitewater High School Career and Technical Education (CTE) Committee meeting along with Derek D’Auria the Executive Director Walworth County Economic Development Alliance (WCEDA). The meeting is held twice a year for the school’s career, technical education teachers, so they can, in turn, share curriculum, and classroom updates with their industry partners and discuss new ideas and developments. Butters and D’Auria took this opportunity to inform the group about the CNC High School Boot Camp coming to Walworth County.
On Monday, March 9th, Barry Butters along with Rich Lofy, the Coordinator of the CNC Youth Boot Camp, spoke to a few East Troy students and parents at East Troy High School about opportunities in the machining industry and the boot camp itself. The event was coordinated by Stacey Kuehn, Assistant Principal at East Troy High School, and it was in conjunction with the school’s parent-teacher conference night.
On Friday, March 13th, Butters met with Lauren Paterson, a Badger High School student, her parent and the Badger High School Career and Technical Education Coordinator, Marie Collins, to discuss the Boot Camp and show Lauren some actual CNC applications.
On Monday, March 16th, Butters met with five students, two parents and the three guidance counselors from Elkhorn Area High School to talk about the CNC Youth Boot Camp and tour China Instrument Parts, so as to give the them a good understanding of the CNC machining industry.
- Butters begins the tours with a PowerPoint talking to students about what they will be seeing on the floor
- Butters shows the students parts that are being run on the Tornos Cam machines
- Butters talks about the Swiss type CNC machine
- Butters shows the students the Miyano CNC turret lathes
- Butters talks about the optical comparator and the Instrument that is held on the parts
On Tuesday, March 31st, three Gateway new student specialists and their supervisor toured China Instrument Parts to gain a better understanding of the machining industry.
The new student specialists were,
- Amanda Hruzek, who services Delavan Darien High School, Williams Bay High School and Badger High School
- Joseph Sell, who services Whitewater High School, Burlington High School and the Wisconsin School for the Deaf
- Katie Graf, who serves the Walworth County Alternative High School, Elkhorn Area High School, Catholic Central High School, East Troy High School and Big Foot High School
Their supervisor is Angela Becerra-Chvilicek, who is the Director of College Access for Gateway.
Today’s machining professionals require a solid and balanced mix of science, technology, engineering, and math (STEM) background, mechanical aptitude and great problem solving skills. As such, it is imperative that those in the guidance/counseling areas have a firm grasp of the skills required to be 21st century machinist.The visit included a PowerPoint presentation and tour of the facility.
On Wednesday, April 1st, China Instrument Parts hosted another tour for students interested in the CNC Boot Camp in Walworth. The participation included two students from Burlington High School, one from Badger High School, one from Waterford Union High School, one from Elkhorn Area High School, and one from Wilmot High School. Each student brought along a parent. There were 12 people total for the tour.
Independently of China Instrument Parts’ efforts, two information meetings have taken place already. There will be one more chance for students to attend an information meeting for the CNC Boot Camp at the WCEDA office on Wednesday, April 8th. The WCEDA Office is now located in the South Building at the Gateway Elkhorn Campus. Interested students can call Marci Barr at 262-741-5263.
